User Manual
Table Of Contents
- Declaration of Conformity
- Contents
- About This Document
- Introduction
- Printer Setup
- Operations
- Configuration
- Routine Maintenance
- Troubleshooting
- Specifications
- End User License Agreement
- Glossary
- Index
83
Operations
Adjust Printhead Pressure and Toggle Position
3/12/09 Xi4 User Guide P1009874-001
4. Some media types require higher pressure to print well. For these media types, increase or
decrease pressure using the lower knurled nuts (
1) until the left and right edges of the
printed area are equally dark.
5. Using the control panel, increase the darkness to the desired level.
6. Tighten the upper knurled nuts.
1