User Manual
Table Of Contents
- Declaration of Conformity
- Contents
- About This Document
- Introduction
- Printer Setup
- Operations
- Configuration
- Routine Maintenance
- Troubleshooting
- Specifications
- End User License Agreement
- Glossary
- Index
Specifications
Features
156
P1009874-001 Xi4 User Guide 3/12/09
Features
This section lists the standard and optional features for the printer.
Standard Features
• Thermal transfer and direct thermal printing
• 16 MB SDRAM (12 MB user-available)
•USB 2.0 Port
•Real-time Clock
• Advanced Counter
• RS-232 serial port
• bidirectional parallel port
•USB 2.0
• XML-enabled printing
Optional Features
• ZebraNet Internal Wireless Plus Print Server
• ZebraNet 10/100 Print Server (internal or external)
• ZebraNet PrintServer II (internal or external)
• IBM twinax/coax interfaces (internal)
• Full-width rotary knife cutter and catch tray
• Media rewind spindle
• Factory-installed 64 MB (61 MB user available) Flash memory option
• Additional fonts
Print Modes
Five different print modes can be used, depending on the printer options purchased:
• Tear-Off Mode: Labels are produced in strips.
• Peel-Off Mode: Labels are dispensed and peeled from the backing as needed.
• Cutter Mode: Labels are printed and individually cut.
• Applicator Mode: The printer is part of a larger label application system.
• Rewind Mode: Labels are rewound internally.
Note • Printer specifications are subject to change without notice.