Specifications

5 - 2 FX Series RFID Readers Integrator Guide
Point of Sale (POS)
Example Parameters
The reader reads up to 10 different tags (1" x 4" RFID embedded garment tags) in the targeted read zone.
Installation
• One 5" x 5" (5.5 dBic with 100
o
beam width) antenna is mounted one foot below the service table (service
table is RF penetrable material).
• The reader is mounted underneath the table (see Chapter 3, Installation and Communication).
Configuration
• Reader power: 20 dBm
• Reader profile or tag population: Small (see Reader Profiles on page 4-27)
• Session: Session 1 (default)
Back Room Inventory Fill
Example Parameters
The reader reads 100 tagged T-shirts in a cardboard box in five seconds at a distance of 2 - 6 feet.
Installation
• Two AN480 antennas: one antenna is mounted 1.5 feet above the box, the second antenna is mounted one
foot below the box.
• The reader is mounted underneath the table (see Chapter 3, Installation and Communication).
Configuration and Optimization
• Reader power: 30 dBm
• Reader profile or tag population: Medium (see Reader Profiles on page 4-27)
• Session: Session 1