Specifications

Administrator Console 4 - 19
Read Tags
Select Read Tags to view the Reader Operation window. Click Start Inventory to initiate an on-demand scan and/or to
enable and disable polled read points.
The polling state displays the current polling setting (
Enabled or Disabled).
Enabling polling from the
Administrator Console displays the Polling State: Enabled from Web message. Enabling
polling from byte stream displays the
Polling State: Enabled from byte stream message.
Figure 4-20 Read Tags Window
• Start Inventory - Starts inventory operation on the connected antennas.
• Stop Inventory - Stops the ongoing inventory operation.
• Clear Tag List - Clears the current tag list.
The list of tags appears in a table with the following attributes for each tag:
• EPC Id - Unique tag EPC ID.
• TagSeen Count - Number of times the tag has been identified on the specific antenna.
• RSSI - Received Signal Strength Indication.
• Antenna Id - Antenna ID on which the tag is seen.
• FirstSeen time stamp - UTC time (in microseconds) when the tag was first seen.
• LastSeen time stamp - UTC time (in microseconds) when the tag was last seen.
NOTE Enable JVM support on the browser in order for this window to function properly. See Appendix D, Java
Upgrade Procedures.