Specifications

4 - 16 FX Series RFID Readers Integrator Guide
Configure Region
Different countries have different RF regulatory requirements. To assure regulatory compliance, select Region to
set the reader for specific regulatory requirements in the country of reader operation using the
Configure Region
Settings
window. The choices on the window are limited to the selections compatible with the reader.
Figure 4-17 Configure Region Settings Window
• Region of Operation - Sets the country of operation. Select this from the drop-down list which includes
countries which have regulatory approval to use with the current board.
• Communication Standard - Sets the communication standard from the list of standards chosen region
supports. If a region supports only one standard, it is automatically selected.
• Frequency Hopping - Check to select frequency hopping. This option appears only if the chosen region of
operation supports this.
• Selected Channels - Sets a subset of channels on which to operate (from the list of supported channels). This
option appears only if the chosen region of operation supports this.
• Listen before Talk - Check to select the listen before talk option. This option appears only if the chosen region
of operation supports this.
• Please confirm - Check the I understand check box.
• Set Properties - Sends the changes to the reader. Confirm that the choices are in compliance with local
regulatory requirements by checking the
I understand check box.
These settings only affect the display. Use Commit/Revert on page 4-32 to save the changes.
NOTE Region configuration is not required for readers configured to operate in the United States region (under
FCC rules).