Specifications

1 - 6 FX Series RFID Readers Integrator Guide
Step 5, Read Tags
Select Read Tags to view the Reader Operation window..
The polling state displays the current polling setting -
Enabled or Disabled.
Figure 1-6 Read Tags Window
• Click Start Inventory to initiate an on-demand scan on the connected antennas and/or to enable or disable
polled read points.
• Click Stop Inventory to stop the ongoing inventory operation.
• Select the Clear Tag List check box to clear the current tag list.
The list of tags appears in a table with the following attributes for each tag:
• EPC Id: Unique tag EPC ID.
• TagSeen Count: Number of times the tag is identified on the specific antenna.
• RSSI: Received Signal Strength Indication.
• Antenna Id: Antenna ID on which the tag is seen.
• FirstSeen time stamp: UTC time (in microseconds) when the tag was first seen.
• LastSeen time stamp: UTC time (in microseconds) when the tag was last seen.
NOTE Enable JVM support on the browser for this page to function properly. See Appendix D, Java Upgrade
Procedures.