User guide

91
Routine Maintenance
Toggle Positioning
1/10/06 170PAX4 User Guide 57516L-002 Rev. A
Toggle Positioning
Proper toggle positioning is important for proper print quality. The toggles should be
positioned approximately 1/4 of the way in from each media edge.
To adjust the toggles, complete these steps:
1. See Figure 36. Loosen the position locking nut by rotating it to the left.
2. Slide the toggle to the desired position on the toggle shaft.
3. Finger tighten the position locking nut by rotating it to the right.
Figure 36 • Toggle Positioning (Right-Hand Unit Shown)
1
Toggle shaft
2
Position locking nut
2
1