User guide

67
Configuration
Control Panel LCD Displays
1/10/06 170PAX4 User Guide 57516L-002 Rev. A
Print Sensor Profile
The sensor profile may be used to troubleshoot registration problems that
may be caused when the media sensor detects preprinted areas on the media
or if it experiences difficulty in determining web location.
Figure 31 shows a sensor profile. If the sensitivity of the media and/or
ribbon sensors must be adjusted, use Calibrate Media and Ribbon Sensor
Sensitivity on page 68 to adjust sensor sensitivity.
Figure 31 • Sensor Profile
To print a sensor profile:
1. Press the right oval to start this standard calibration procedure and print
a media sensor profile.
Table 6 • Print Engine Parameters (Page 13 of 26)
Parameter
Action/Explanation
SENSOR PROFILE
PRINT