User guide

Configuration
Control Panel LCD Displays
56
57516L-002 Rev. A 170PAX4 User Guide 1/10/06
Adjust Slew Speed
Adjusts the speed for feeding a blank label (given in inches per second).
Default: 6 IPS
Range: 1 to 12 IPS
To change the value shown:
1. Press the right oval to increase the value.
2. Press the left oval to decrease the value.
Adjust Backfeed Speed
If backfeed is on, adjusts the speed at which the label backs up before
printing (given in inches per second).
Default: 2 IPS
Range: 1 to 12 IPS
To change the value shown:
1. Press the right oval to increase the value.
2. Press the left oval to decrease the value.
Table 6 • Print Engine Parameters (Page 2 of 26)
Parameter
Action/Explanation
SLEW SPEED
6 IPS +
BACKFEED SPEED
2 IPS +