User guide

Configuration

Print a Network Configuration Label

57516L-002 Rev. A 170PAX4 User Guide 1/10/06

Print a Network Configuration Label

If you are using a print server, you can print a network configuration label after the

print engine is connected to the network.

To print a network configuration label, complete these steps:

1. On the control panel, press SETUP/EXIT.

2. Press NEXT or PREVIOUS to scroll through the parameters until you reach

LIST NETWORK.

3. Press the right oval to confirm printing.

A network configuration label prints (Figure 28). An asterisk designates whether the

wired or wireless print server is active. If no wireless print server is installed, the wireless

portion of the label does not print.

Figure 28 • Network Configuration Label (With a Wireless Print Server Installed)