User guide

53
Configuration
Print a Configuration Label
1/10/06 170PAX4 User Guide 57516L-002 Rev. A
Print a Configuration Label
A configuration label lists the print engine settings that are stored in configuration memory.
After you load the media and ribbon (if necessary), print a configuration label as a record of
your print engine’s current settings. Keep the label to use when troubleshooting printing
problems.
To print a configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT.
2. Press NEXT or PREVIOUS to scroll through the parameters until you reach
LIST SETUP.
3. Press the right oval to confirm printing.
A configuration label prints (Figure 27).
Figure 27 • Configuration Label