User guide

15
Print Engine Setup
Handling the Print Engine
1/10/06 170PAX4 User Guide 57516L-002 Rev. A
Handling the Print Engine
This section describes how to handle your print engine.
Unpack and Inspect the Print Engine
When you receive the print engine, immediately unpack it and inspect for shipping damage.
• Save all packing materials.
• Check all exterior surfaces for damage.
• Raise the media door, and inspect the media compartment for damage to components.
If you discover shipping damage upon inspection:
• Immediately notify the shipping company and file a damage report.
• Keep all packaging material for shipping company inspection.
• Notify your authorized Zebra reseller.
Store the Print Engine
If you are not placing the print engine into immediate operation, repackage it using the original
packing materials. You may store the print engine under the following conditions:
• Temperature: –40° to 160°F (–40° to 71°C)
• Relative humidity: 5% to 95% non-condensing
Ship the Print Engine
If you must ship the print engine:
• Remove any media or ribbon from the print engine to avoid damaging the print engine.
• Carefully pack the print engine into the original container or a suitable alternate container
to avoid damage during transit. A shipping container can be purchased from Zebra if the
original packaging has been lost or destroyed.
Recycle the Print Engine
This print engine is recyclable. If you must dispose of the print engine, do not do so
in unsorted municipal waste. Please recycle according to your local standards. For
more information, see http://www.zebra.com/environment.
Important • Zebra Technologies is not responsible for any damage incurred during the
shipment of the equipment and will not repair this damage under warranty.