User guide

Print Engine Setup
Before You Begin
14
57516L-002 Rev. A 170PAX4 User Guide 1/10/06
Before You Begin
Review this checklist, and resolve any issues before you set up or use your print engine.
 Unpack and Inspect the Print Engine Have you unpacked the print engine and
inspected it for damage? If you have not, see Unpack and Inspect the Print Engine
on page 15.
 print engineInstall the Print Engine Have you considered what factors will affect how
the print engine is installed into an applicator? Is the print engine mounted in an
applicator? For information, see Print Engine Installation on page 16.
 Attach a Power Cord Do you have the correct power cord for your print engine? If
you are unsure, see Power Cord Specifications on page 22. To attach the power cord and
connect the print engine to a power source, see Connect the Print Engine to a Power
Source on page 21.
 Connect to a Data Source Have you determined how the print engine will connect to
a data source (usually a computer)? For more information, see Select a Communication
Interface on page 23.
 Select Media Do you have the correct media for your application? If you are unsure,
see Types of Media on page 27.
 Select Ribbon Do you need to use ribbon, and is the appropriate ribbon available, if
needed? If you are unsure, see Ribbon Overview on page 29.