User guide

Routine Maintenance
Toggle Positioning
57516L-001 Rev. 1 10/12/2004 170PAX4 User Guide 85
Toggle Positioning
Proper toggle positioning is important for proper print quality. The toggles should be
positioned approximately 1/4 of the way in from each media edge.
To adjust the toggle, complete these steps:
1. See Figure 45. Loosen the position locking nut by rotating it to the left.
2. Slide the toggle to the desired position on the toggle shaft.
3. Finger tighten the position locking nut by rotating it to the right.
Figure 45 • Toggle Positioning (Right-Hand Unit Shown)
1
Toggle shaft
2
Position locking nut
2
1