User guide

64 170PAX 4 User Guide 10/12/2004 57516L-001 Rev. 1

Print Engine Configuration

Front Panel LCD

Print Sensor Profile

The media sensor profile may be used to troubleshoot registration

problems that may be caused when the media sensor detects preprinted

areas on the media or experiences difficulty in determining web location.

• Press the right oval to start this standard calibration procedure and print

a media sensor profile.

Figure 39 shows a media sensor profile. If the sensitivity of the media

and/or ribbon sensors must be adjusted, use Calibrate Media and Ribbon

Sensor Sensitivity on page 65 to adjust sensor sensitivity.

Figure 39 • Media Sensor Profile

Table 6 • Print Engine Parameters (Sheet 8 of 19)

Parameter Action/Explanation

SENSOR PROFILE