User guide

Print Engine Configuration
Front Panel LCD
57516L-001 Rev. 1 10/12/2004 170PAX4 User Guide 63
Initialize Memory Card
Caution • Perform this operation only when it is necessary to erase all
previously stored information from the optional PCMCIA card or
CompactFlash card.
1. Press the right oval to select YES. (If you are prompted to enter the
password, see Changing Password-Protected Parameters on page 56.
The front panel LCD asks
ARE YOU SURE?.
2. Do you wish to continue?
• Press the left oval to select NO to cancel the request and return to
INITIALIZE CARD prompt.
• Press the right oval to select
YES and begin initialization.
When initialization is complete, the print engine automatically exits
Setup mode, and the front panel displays
PRINTER READY. If you
exit Setup mode while initialization is still in process, the front panel
display flashes between the phrases
CHECKING B: MEMORY and
PRINTER IDLE.
Note • Depending on the amount of memory in the memory card,
initialization may take up to 5 minutes to complete.
Initialize Flash Memory
Caution • Perform this operation only when it is necessary to erase all
previously stored information from Flash memory.
1. Press the right oval to select YES. (If you are prompted to enter the
password, see Changing Password-Protected Parameters on page 56.
The display shows
INITIALIZE FLASH?
2. Press the right oval to select YES.
The display shows ARE YOU SURE?.
3. Do you wish to continue?
• Press the left oval to select
NO to cancel the request and return to the
INITIALIZE FLASH prompt.
• Press the right oval to select
YES and begin initialization.
When initialization is complete, the print engine automatically exits
Setup mode, and the front panel displays
PRINTER READY. If you
exit Setup mode while initialization is still in process, the front panel
display flashes between the phrases
CHECKING E: MEMORY and
PRINTER IDLE.
Note • Depending on the amount of free FLASH memory,
initialization may take up to 1 minute to complete.
Table 6 • Print Engine Parameters (Sheet 7 of 19)
Parameter Action/Explanation
FORMAT CARD:
A: B:
INIT FLASH MEM
YES