User guide

Print Engine Configuration
Print a Network Configuration Label
57516L-001 Rev. 1 10/12/2004 170PAX4 User Guide 55
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the print
engine is connected to the network.
To print a network configuration label, complete these steps:
1. On the front panel, press SETUP/EXIT.
2. Press NEXT or PREVIOUS to scroll through the parameters until you reach
LIST NETWORK.
3. Press the right oval to confirm printing.
A network configuration label prints (Figure 37). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
Figure 37 • Network Configuration Label (With a Wireless Print Server Installed)