User guide

Print Engine Operation
Load Media
57516L-001 Rev. 1 10/12/2004 170PAX4 User Guide 39
13. See Figure 26. Thread the media liner around the peel bar, under the platen roller, and
through the peel roller assembly.
Figure 26 • Threading the Liner
14. See Figure 27. Rotate the peel roller assembly up until it locks into the closed position.
Figure 27 • Closed Peel Roller Assembly
15. See Figure 26. Thread the media liner under the lower guide post and around the take-up
spindle of the applicator (refer to the applicator’s user guide).
16. Close the media door.
Note • If the applicator has an air tube, route the media liner between the air tube and the
peel bar. Do not thread the media liner over the air tube.
1
Peel bar
2
Platen roller
3
Peel roller assembly
4
Lower guide post
1
2
3
4