User guide

Print Engine Operation
Load Media
57516L-001 Rev. 1 10/12/2004 170PAX4 User Guide 37
6. See Figure 23. Thread the media through the upper media path as follows:
a. Under the upper guide post
b. Between the top media sensor track assembly and the label guide shelf assembly
c. Below the pinch roller assembly
d. Under the printhead assembly
7. See Figure 23. Extend approximately 30 in. (75 cm) of media past the peel bar. Remove
and discard the labels from this exposed media.
Figure 23 • Threading the Media
1
Upper guide post
2
Top media sensor track assembly
3
Label guide shelf assembly
4
Pinch roller assembly
5
Printhead assembly
6
Peel bar
7
Liner
8
Label
1 4
5
7
2 3
6
8