User guide

Print Engine Basics
Front Panel
57516L-001 Rev. 1 10/12/2004 170PAX4 User Guide 9
Front Panel
All controls and indicators for the print engine are located on the front panel (Figure 4). The
Liquid Crystal Display (LCD) shows print engine operating status and printing parameters.
The buttons are used to control the print engine operations and change printing parameters.
The lights (LEDs) indicate the print engine’s status.
Figure 4 • Front Panel (Right-Hand)
Front Panel Buttons
The front panel buttons are described in Table 1.
1
Buttons
2
Liquid Crystal Display (LCD)
3
Lights/LEDs
2 131
Table 1 • Front Panel Buttons
Button Description/Function
BLACK OVALS The two black ovals are used to change parameter values for a parameter being
displayed on the LCD. Common uses include increasing or decreasing a value,
answering yes or no, indicating ON or OFF, and scrolling through choices.
PREVIOUS Scrolls the LCD to the previous parameter.
NEXT Scrolls the LCD to the next parameter.
SETUP/EXIT Enters and exits configuration mode.
PAUSE Stops and restarts the printing process or removes error messages and clears the LCD.
If a label is printing, it is completed before the printing process stops. When the print
engine is paused, the PAUSE light is ON.
CANCEL
CANCEL functions only in Pause mode. Pressing CANCEL has these effects:
• Cancels the label format that is currently printing.
• If no label format is printing, the next one to be printed is canceled.
• If no label formats are waiting to be printed,
CANCEL is ignored.
To clear the print engine’s entire label format memory, press and hold
CANCEL until
the DATA light turns off.