User guide

Front Panel Controls
Front Panel LCD
13383L-001 Rev. 1 7/8/2004 XiIIIPlus User Guide 69
HEAD TEST
COUNT
Setting the Head Test Count
The printer periodically performs a test of the printhead functionality, called a printhead
test or head test. This parameter establishes how many labels are printed between these
internal tests.
1. Press the left oval to move to the next digit position.
2. Press the right oval to increase the value of the digit.
Default: 0000 (disables the test)
Range: 0000 to 9999
Note • This parameter will only appear if the Head Test Count option is installed.
For 110XiIIIPlus printers, look at the configuration label to see if the option is
installed.This option is available only on the BP-360X-Plus II.
Table 5 • Printer Parameters (Sheet 13 of 16)
Parameter Action/Explanation
If the Head Test Option is
installed, HEAD TEST COUNT
will be listed.