User guide

Front Panel Controls
Front Panel LCD
13383L-001 Rev. 1 7/8/2004 XiIIIPlus User Guide 61
LIST FONTS
List Fonts
• Press the right oval to print a label that lists the available fonts in the printer, including
standard printer fonts plus any optional fonts. Fonts may be stored in RAM, Flash
memory, font EPROMs, or font cards.
LIST BAR
CODES
List Bar Codes
• Press the right oval to print a label that lists the available bar codes in the printer.
LIST IMAGES
List Images
• Press the right oval to print a label that lists the available images stored in the printer’s
RAM, Flash memory, optional EPROM, or optional memory card.
LIST FORMATS
List Formats
• Press the right oval to print a label that lists the available formats stored in the printer’s
RAM, Flash memory, optional EPROM, or optional memory card.
LIST SETUP
List Setup
• Press the right oval to print a label that lists the current printer configuration. (Same
label as shown in Print a Printer Configuration Label on page 29.)
LIST NETWORK
List Network Settings
This selection is used to print a network configuration label, which lists the settings for the
wired ZebraNet PrintServer II (PSII) and the ZebraNet Wireless Print Server (if installed).
• Press the right oval to print a label that lists the current network configuration. (Same
label as shown in Print a Network Configuration Label on page 31.)
LIST ALL
List All
• Press the right oval to print labels that list the available fonts, bar codes, images,
formats, and the current printer and network configurations.
FORMAT CARD
A B
Format Memory Card
Caution • Perform this operation only when it is necessary to erase all previously
stored information from the memory card.
1. When the LCD displays INITIALIZE CARD , press the left oval to select the A
memory (internal CompactFlash) or the right oval to select B memory (PCMCIA
card). (If you are prompted for a password, enter your password using the instructions
in Password-Protected Parameters on page 56.)
The front panel LCD asks
ARE YOU SURE? .
2. Do you wish to continue?
• Press the left oval to select
NO to cancel the request and return to INITIALIZE
CARD
prompt.
• Press the right oval to select
YES and begin initialization.
FORMATTING CARD displays.
When formatting is complete,
INITIALIZE CARD displays.
Note • Depending on the amount of memory in the memory card, initialization may take
up to three minutes to complete.
Table 5 • Printer Parameters (Sheet 5 of 16)
Parameter Action/Explanation