User guide

48 XiIIIPlus User Guide 13383L-001 Rev. 1 7/8/2004
Print Modes and Options
Print Modes
11. Wind the label backing around either the 3 in. (76 mm) core or the rewind spindle.
Reinstall the hook.
12. Flip up the media supply guide. Slide in the media guide and media supply guide so they
just touch the edge of the labels. The labels should lie flat.
13. Before closing the printhead, make sure that:
• The labels are positioned against the inside guides.
• The labels are taut and parallel to the pathway when wound onto the rewind spindle or
core.
14. Close the printhead.
The labels wind on the rewind spindle or core.
15. For instructions for removing the backing from the rewind spindle, see Remove Backing
or Labels from Rewind Spindle on page 51.