User guide

46 XiIIIPlus User Guide 13383L-001 Rev. 1 7/8/2004
Print Modes and Options
Print Modes
Rewind Mode
Rewind Mode (Figure 32) allows the media to be wound on a core after printing.
Figure 32 • Media Loaded in Rewind Mode
To install the rewind plate, complete these steps:
1. Remove the rewind plate from its storage location inside the printer.
2. Position the rewind plate so that the lip on the attached hook plate points down.
3. Insert the hook plate lip 1/2 in. (13 mm) into the lower slot in the side plate.
4. Align the upper end of the rewind plate with the matching slot in the side plate.
5. Slide in the rewind plate until it stops against the printer’s main frame.
Figure 33 shows the rewind plate and where it hooks to the printer.
1
Printhead lever
2
Media guide
3
Media supply guide
4
Labels
5
Guide plate
6
Spindle hook
7
Rewind spindle
8
Rewind plate for Rewind Mode only
9
Printed labels
1
2 3
4
7 6
5
8
9