User guide

Print Modes and Options
Print Modes
13383L-001 Rev. 1 7/8/2004 XiIIIPlus User Guide 41
Print Modes
The options on your printer may let you set up additional print modes. Use the front panel
controls to set up the printer to the print mode that you wish to use.
The following are the print mode selections available through the front panel. Some of them
require that the option be purchased.
•Tear-off
• Peel-off
•Cutter
•Rewind
• Applicator (used only if a machine will apply printed labels to something)
To select a print mode, complete these steps:
1. From the front panel, press SETUP/EXIT.
2. Press NEXT/SAVE until the LCD reads PRINT MODE .
3. Use the right or left oval to scroll though the choices. Be sure to select a print mode that
your hardware supports—some of the selections displayed are for optional printer
features.
4. To save your selection, press SETUP/EXIT.
Tear-Off Mode
See Load the Printer on page 20 to set up labels in Tear-Off Mode.