User guide

Printer Setup
Types of Media
13383L-001 Rev. 1 7/8/2004 XiIIIPlus User Guide 15
Non-Continuous Media
Non-continuous web media refers to individual labels that are separated by a gap, notch, or
hole (Figure 10). When you look at the media, you can tell where one label ends and the next
one begins.
Figure 10 • Non-Continuous Web Media
Non-continuous black mark media has black marks printed on the back, which indicate the
start and end of each label. Figure 11 shows a sample of non-continuous black mark media.
Figure 11 • Non-Continuous Black Mark Media
Continuous Media
Continuous media (Figure 12) is one uninterrupted roll of material without gaps, holes,
notches, or black marks. This allows the image to be printed anywhere on the label. The
individual labels can be cut apart or stored in a roll for later use.
Figure 12 • Continuous Media
1
Hole
2
Label Gap
3
Notch
Important • When using media that has holes or notches, position the upper sensor directly
over a hole or notch.
213