User guide

132 XiIIIPlus User Guide 13383L-001 Rev. 1 7/8/2004
Specifications
Label Specifications
140XiIIIPlus, 170XiIIIPlus, and 220XiIIIPlus Black Mark Sensing Only
Maximum roll diameter 8.0 in. (203 mm) 8.0 in. (203 mm) 8.0 in. (203 mm)
Interlabel gap 0.079 in. (2 mm)
0.118 in. (3 mm)
0.079 in. (2 mm)
0.118 in. (3 mm)
0.079 in. (2 mm)
0.118 in. (3 mm)
Maximum interlabel gap No more than the
calibrated length of the
label.
No more than the
calibrated length of the
label.
No more than the
calibrated length of the
label.
Maximum internal fanfold
media pack size (label +
backing)
L×W×H
8.0×5.5×4.5 in.
(203×114×114 mm)
8.0×7.1×4.5 in.
(203×114×114 mm)
8.0×8.8×4.5 in.
(203×114×114 mm)
Ticket/tag sensing notch
L×W
0.12×0.25 in. (3×6 mm) 0.12×0.25 in. (3×6 mm) 0.12×0.25 in. (3×6 mm)
Ticket/tag sensing hole
diameter
0.125 in. (3 mm) 0.125 in. (3 mm) 0.125 in. (3 mm)
Effective leading edge
registration accuracy
(vertical)
± 0.070 in. (± 1.8 mm) ± 0.070 in. (± 1.8 mm) ± 0.060 in. (± 1.5 mm)
Effective leading edge
registration accuracy
(horizontal)
± 0.070 in. (± 1.8 mm) ± 0.070 in. (± 1.8 mm) ± 0.060 in. (± 1.5 mm)
Label Specifications 140XiIIIPlus 170XiIIIPlus 220XiIIIPlus
Label Specifications 140XiIIIPlus 170XiIIIPlus 220XiIIIPlus
Mark length (measuring
parallel to label or tag
edge)
0.12 in. (3 mm)
0.43 in. (11 mm)
0.12 in. (3 mm)
0.43 in. (11 mm)
0.12 in. (3 mm)
0.43 in. (11 mm)
Mark width (measuring to
perpendicular label or tag
edge)
0.43 in. (11 mm)
Full media width 
0.43 in. (11 mm) 
Full media width 
0.43 in. (11 mm)
Full media width 
Mark location Marks must be located
within 0.040 in. (1 mm) of
the inside media edge.
Marks must be located
within 0.040 in. (1 mm) of
the inside media edge.
Marks must be located
within 0.040 in. (1 mm) of
the inside media edge.
Mark density in Optical
Density Unit (ODU)
>1.0 >1.0 >1.0