User guide

130 XiIIIPlus User Guide 13383L-001 Rev. 1 7/8/2004
Specifications
Label Specifications
90XiIIIPlus, 96XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, and
220XiIIIPlus Printers
Label Specification Key This table contains the key for the label modes, dimensions, and
directions:
90XiIIIPlus and 96XiIIIPlus
Important • Media registration and minimum label length are affected by label type and
width, ribbon type, print speed, and printer mode of operation. Performance improves as these
factors are optimized. Zebra recommends qualifying any application with thorough testing.
T Tear-Off  Minimum
P Peel-Off  Maximum
C Cutter  Preferred
R Rewind
Label Specifications 90XiIIIPlus* 96XiIIIPlus*
Minimum label length 0.7 in. (18 mm) T 0.7 in. (18 mm) T
0.5 in. (13 mm) P 0.5 in. (13 mm) P
1.5 in. (38 mm) C 1.5 in. (38 mm) C
0.25 in. (6 mm) R 0.25 in. (6 mm) R
Total media width (label + backing,
if any)
0.79 in. (20 mm)
3.54 in. (90 mm)
0.79 in. (20 mm)
3.54 in. (90 mm)
Total thickness
(includes backing, if any)
0.003 in. (0.076 mm)
0.012 in. (0.305 mm)
0.003 in. (0.076 mm)
0.012 in. (0.305 mm)
Cutter maximum full-width media
thickness
0.014 in. (0.35 mm) 0.014 in. (0.35 mm)
Roll media core inside diameter 3 in. (76 mm) 3 in. (76 mm)
Maximum roll diameter 8.0 in. (203 mm) 8.0 in. (203 mm)
Interlabel gap 0.079 in. (2 mm)
0.118 in. (3 mm)
0.079 in. (2 mm)
0.118 in. (3 mm)
Maximum interlabel gap No more than the calibrated length
of the label.
No more than the calibrated length
of the label.
Maximum internal fanfold media
pack size (label + backing)
L×W×H
8.0×4.5×4.5 in.
(203×114×114 mm)
8.0×4.5×4.5 in.
(203×114×114 mm)
*The 90XiIIIPlus and 96XiIIIPlus printers are discontinued.