User guide

126 XiIIIPlus User Guide 13383L-001 Rev. 1 7/8/2004
Specifications
Ribbon Specifications by Model
Ribbon Specifications by Model
Refer to the tables that follow for ribbon specifications for your type of printer.
110XiIIIPlus
90XiIIIPlus, 96XiIIIPlus, and 140XiIIIPlus
Note • Match the ribbon to the label width and printhead width that you are using.
• Ribbon must be wound with the coated side out.
• Ribbon should be at least as wide as the labels to protect the printhead from excessive wear.
Ribbon Specifications
110XiIIIPlus
200 dpi
110XiIIIPlus
300 dpi
110XiIIIPlus
600 dpi
Printhead resolution 203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
Ribbon width Minimum 0.79 in. (20 mm) 0.79 in. (20 mm) 0.79 in. (20 mm)
Ribbon width Maximum
4.33 in. (110 mm) 4.33 in. (110 mm) 3.40 in. (87 mm)
Standard length with 2:1
label to ribbon ratio
984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with 3:1
label to ribbon ratio
1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside
diameter
1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll
outside diameter
3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)
Ribbon Specifications 90XiIIIPlus* 96XiIIIPlus* 140XiIIIPlus
Printhead resolution 300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
203 dots/inch
(8 dots/mm)
Ribbon width Minimum 0.79 in. (20 mm) 0.79 in. (20 mm)
1.57 in. (40 mm)
Ribbon width Maximum 3.40 in. (87 mm) 3.40 in. (87 mm)
5.10 in. (130 mm)
Standard length with
2:1 label to ribbon ratio
984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length with
3:1 label to ribbon ratio
1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside diameter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon roll outside diameter 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)
*The 90XiIIIPlus and 96XiIIIPlus printers are discontinued.