Datasheet

Standard Features
• Print methods: Thermal transfer or direct thermal
• 32 bit 133 Mhz RISC processor
• 8 MB Flash memory—including 2.0 MB
user-available non-volatile memory storage
for downloadable objects
• Internal real-time clock
• Advanced label/media counters
• Auto calibration—printer calibrates when printer
is turned on or when printhead is closed using
approximately two labels
• Early warning systems—provide low label, low
ribbon and clean printhead alerts via the front panel
and ZebraLink alerts
• New full-function front panel and large multilingual
back-lit LCD display—with user-programmable
password protection
• Clear media side door—easy monitoring of supplies
usage without opening the printer systems
• Thin film printhead with Element Energy Equalizer™
(E
3
™) for superior print quality
• Serial RS-232 and bi-directional parallel ports—with
auto detect
• Internal ZebraNet
®
10/100 Print Server (Ethernet)
• Dual media sensors—transmissive and reflective,
selectable through software or front panel
Operating Characteristics
Environment
• Operating Temperature:
40° F/5° C to 105° F/40° C (Thermal Transfer)
32° F/0° C to 105° F/40° C (Direct Thermal)
• Storage/Transport Environ.:
-40° F/-40° C to 140° F/60° C
• Operating Humidity: 20-85% non-condensing
• Storage Humidity: 5-85% non-condensing
Electrical
• Universal power supply with power-factor correction
90-264 VAC; 48-62 Hz
• Serial RS-232 and bi-directional parallel ports—with
auto detect
• USB 2.0 port
Agency approvals
• IEC 60950-1, EN 55022 Class B, EN 55024, EN
61000-3-2, EN 61000-3-3
Media Characteristics
Labels
• Max. Roll Size: 8"/203 mm O.D. on a 3"/76 mm
I.D. core
• Thickness (label & liner): .003"/.076 mm to
.012"/.305 mm
• Media Types: Continuous fanfold, die-cut or black
mark
• For optimum print quality and printer performance,
use genuine Zebra™ supplies.
Ribbons
• Ribbon is recommended to be at least as wide as
media.
• Max. Roll Size: 3.2"/81.3 mm O.D. on a 1"/25.4 mm
I.D. core
• Standard Lengths: 1,476'/450 m or 984'/300 m;
provides 3:1 & 2:1 media roll to ribbon ratios
• Ribbon Setup: Ribbon wound ink side out
ZebraLink Solutions
Software
• ZebraDesigner™ Pro
• ZebraDesigner
• ZebraDesigner for XML
• ZebraNet™ Utilities v 7.0
• ZebraNet Bridge Enterprise
• Zebra Enterprise Connector
Networking
• ZebraNet Wireless Plus Print Server
• ZebraNet 10/100 Print Server
Firmware
• ZPL
®
or ZPL II
®
programming language—selectable
through software or front panel
• XML-Enabled printing—direct-connect integration for
bar code label printing; eliminates license fees and
print server hardware and lowers customization and
programming costs
• Unicode™-compliant Global Printing
• ZBI 2.1™—Allows printers to run applications,
prompt users through control-panel commands and
use files stored on the printer as a data source.
Fonts/Graphics/Symbologies
Fonts and character sets
• Bitmap fonts A through H and GS symbols are
expandable up to 10 times; height and width
independent
• Smooth, scalable font Ø (CG Triumvirate™ Bold
Condensed) is expandable dot-by-dot; height and
width independent
• IBM
®
Code Page 850 International Characters
• Contains UFST
®
from Montotype Imaging, Inc.
Graphic features
Supports user-defined fonts and graphics—including
custom logos
Bar code symbologies
• Linear Bar Codes: Code 11, Code 39, Code 93, Code
128 with subsets A/B/C and UCC Case C Codes,
ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC
and EAN 2 or 5 digit extensions, Plessey, Postnet,
Standard 2-of-5, Industrial 2-of-5, Interleaved 2-of-5,
Logmars, MSI, Codabar, Planet Code
• 2-Dimensional: Codablock, PDF417, Code 49, Data
Matrix, MaxiCode, QR Code, MicroPDF417, TLC 39,
GS1 DataBar (RSS), Aztec
Options and Accessories
• Rewind
• Cutter and catch tray
• Bi-fold media door with clear panel
• Media supply spindle for 3"/76 mm core or 40 mm
core
• Applicator interface
• 64 MB On-Board Linear Flash Memory
• Scalable and international fonts
For optimal printing quality and proper printer
performance across our product line, Zebra strongly
recommends the use of genuine Zebra™ supplies
as part of the total solution. Specifically, the Xi4
printer is designed to work only with genuine Zebra™
printheads, thus maximizing safety and print quality.
Specifications at a Glance*
*Specifications subject to change without notice.
©2010 ZIH Corp. ZebraLink, ZebraDesigner, ZebraNet, Element Energy Equalizer, E
3
and all product names and numbers are Zebra trademarks, and Zebra, the Zebra head graphic, ZebraNet, ZPL, and ZPL II are registered
trademarks of ZIH Corp. All rights reserved. IBM is a trademark or registered trademark of International Business Machines Corporation in the United States, other countries, or both. CG Triumvirate and UFST are trademarks of
Monotype Imaging, Inc. and may be registered in certain jurisdictions. All other trademarks are property of their respective owners.
GSA#: GS-35F-0268N
P1017278 Rev. 2 (4/11)
Corporate Headquarters Asia-Pacific Headquarters EMEA Headquarters Latin America Headquarters
[phone] [phone] [phone] [phone]
Email: [e-mail] Email: [e-mail] Email: [e-mail] Email: [e-mail]
Other Locations
USA: California, Georgia, Illinois, Rhode Island, Texas, Wisconsin Europe: France, Germany, Italy, the Netherlands, Poland, Spain, Sweden, Turkey,
United Kingdom Asia Pacific: Australia, China, Hong Kong, India, Japan, Malaysia, South Korea, Singapore, Thailand Latin America: Brazil, Florida
(LA Headquarters in USA), Mexico Africa/Middle East: Dubai, South Africa
www.zebra.com