User guide

95
Routine Maintenance
Toggle Positioning
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A
Toggle Positioning
Proper toggle positioning is important for proper print quality. The toggle should be positioned
approximately midway across the width of the media.
To adjust the toggle, complete these steps:
1. Print some labels at 2.4 in.(61 mm) per second by running the PAUSE Self Test (see
PAUS E Se lf Test on page 121).
2. While printing labels, use the control panel to lower the darkness setting until the labels
are printing gray instead of black (see Adjust Print Darkness on page 64).
3.
4.
Position the toggle over the center of the labels.
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Loosen the locking nut at the top of the toggle assembly.