User guide

Routine Maintenance
Clean the Printhead and Platen Roller
94
57512L-004 Rev. A 110PAX4/R110PAX4 User Guide 6/29/11
4. Using Preventative Maintenance kit (part number 47362) or a solution of 90% isopropyl
alcohol and 10% deionized water on a cotton swab, wipe the print elements from end to
end. Allow the solvent to evaporate.
5. Use a lint-free cloth moistened with alcohol to clean the platen roller and other rollers.
Rotate the rollers while cleaning.
6. Reload the ribbon and media (if used).
7. Turn On (
I) the print engine.
1
Printhead elements (gray strip)
2
Cotton swab
3
Platen Roller
Note • If print quality does not improve after you perform this procedure, clean the printhead
with Save-a-Printhead cleaning film. Call your authorized Zebra distributor for more
information.
3
1 2