User guide

Operations

Calibrate the Print Engine

57512L-004 Rev. A 110PAX4/R110PAX4 User Guide 6/29/11

Sensor Profile Calibration The print engine auto-calibrates

and prints a media sensor profile.

See Sensor Profile on page 130.

Select the SENSOR PROFILE

option on the control panel. See

Print Sensor Profile on page 76

for instructions.

Media and Ribbon Sensor

Sensitivity Calibration

This calibration is one of the most

common adjustments made to

print engine settings. The

print engine resets the sensitivity

of the sensors specifically for the

media and ribbon that you are

using. If you change the type of

ribbon and/or media, you might

need to reset the sensitivity of the

media and ribbon sensors. When

the sensors are at their new

sensitivity, the print engine

performs an auto-calibration.

Select the MEDIA AND RIBBON

CALIBRATE option on the

control panel. See Calibrate

Media and Ribbon Sensor

Sensitivity on page 77 for

instructions.

Table 6 • Types of Calibration (Continued)

Type of Calibration Description When/How It Occurs