User guide

Introduction
Control Panel
18
57512L-004 Rev. A 110PAX4/R110PAX4 User Guide 6/29/11
Control Panel Indicator Lights (LEDs)
The control panel lights are described in Table 2.
CANCEL
CANCEL functions only in Pause mode. Pressing CANCEL has these effects:
• Cancels the label format that is currently printing.
• If no label format is printing, the next one to be printed is canceled.
• If no label formats are waiting to be printed,
CANCEL is ignored.
To clear the print engine’s entire label format memory, press and hold
CANCEL until
the DATA light turns off.
FEED Feeds a blank label.
• If the print engine is idle or paused, the label is fed immediately.
• If the print engine is printing, the label is fed after the current batch prints.
CALIBRATE
CALIBRATE functions only in Pause mode. Press CALIBRATE to recalibrate for
proper media length, to set media type (continuous/non-continuous), and to set print
method (direct thermal/thermal transfer).
Table 1 • Control Panel Buttons (Continued)
Button
Description/Function
Table 2 • Control Panel Lights
LED OFF Indicates ON Indicates FLASHING Indicates
POWER
(Green)
The print engine is
OFF, or no power
to print engine.
Power switch is ON, and power is
being supplied to the print engine.
—
PAUSE
(Yellow)
Normal operation. One of the following:
• The print engine is paused because
of an error condition (printhead,
ribbon, or paper error). Usually
occurs in conjunction with another
LED.
• PAUSE was pressed.
• A pause was requested from the
Applicator Port.
• A pause was received as part of
the label format.
—
DATA
(Green)
No data being
received or
processed.
Data is processing or printing is
taking place. No data is being
received.
The print engine is receiving data
from or sending status information
to the host computer.
MEDIA
(Yellow)
Normal operation.
Media properly
loaded.
Out of media (print engine is paused,
LCD displays error message, and
PAUSE light is ON).
—