User guide

17
Introduction
Control Panel
6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A
Control Panel
All controls and indicators for the print engine are located on the control panel (Figure 3). The
Liquid Crystal Display (LCD) shows print engine operating status and feature parameters. The
buttons are used to control the print engine operations and change parameters. The lights
(LEDs) indicate the print engine’s status.
Figure 3 • Control Panel (Right-Hand)
Control Panel Buttons
The control panel buttons are described in Table 1.
1
Buttons
2
LCD
3
Lights/LEDs
2 1 31
Table 1 • Control Panel Buttons
Button
Description/Function
LEFT and RIGHT
OVAL
The left and right ovals are used to change parameter values for a parameter being
displayed on the LCD. Common uses include increasing or decreasing a value,
answering yes or no, indicating ON or OFF, and scrolling through choices.
PREVIOUS Scrolls the LCD to the previous parameter.
NEXT Scrolls the LCD to the next parameter.
SETUP/EXIT Enters and exits configuration mode.
PAUSE Stops and restarts the printing process or removes error messages and clears the LCD.
If a label is printing, it is completed before the printing process stops. When the
print engine is paused, the PAUSE light is ON.