User's Manual

Specifications
Ribbon Specifications
11342L Re v. 8 6/4/2004 105SL User Guide 95
Ribbon Specifications
Font Specifications
203 dpi (8 dots/mm)
Ribbon Specifications
105SL
Ribbon must be wound with t he coated side out.
Ribbon width (Zebra recommends using
ribbon at least as wid e as the media to
protect the printhead from wear.)
Minimum 0.79 in. (20 mm)
Maximum 4.49 in. (114 mm)
Standard lengths 2:1 media to ribbon roll ratio 984 ft. (300 m)
3:1 media to ribb on roll ratio 147 6 ft. (450 m)
Ribbon core inside diameter 1.0 in. (25.4 mm)
Maximum ribbon roll outside diameter 3.2 in. (81.3 mm)
Note • Bitmap fonts A throug h H and GS symbols are expandab le up to 10 times, height and
width indep endent.
Smooth scalable font
∅ (CG T r iumv irate™ Bol d Con densed) is exp andab le do t-by-d ot, h eight
and width inde p end ent.
IBM
®
Code Page 850 International Char acters.
Fonts
Matrix (in dots)
(H × W)
Type*
Minimum Char. Size
(H × W)
Maximum
C.P.I.
A 9 × 5 U-L-D 0.044 in. × 0.029 in. 33.9
B 11 × 7 U 0.054 in. × 0.044 in. 22.6
C,D 18 × 10 U-L-D 0.088 in. × 0.059 in. 16.9
E 28 × 15 OCR-B 0.138 in. × 0.098 in. 10.1
F 26 × 13 U -L-D 0.1 28 in. × 0.079 in. 1 2.7
G 60 × 40 U-L-D 0.295 in. × 0.236 in. 4.2
H 21 × 13 OCR-A 0.103 in. × 0.093 in. 10.7
GS 24 × 24 SYMBOL 0.118 in. × 0.118 in. 8.4
∅ variable U-L-D variable N/A
* U = Uppercase; L = Lowercase; D = Descenders