Specifications
Page 4-2 105SL Maintenance Manual 32056L Rev. 2 12/4/01
SECTION 4 PREVENTIVE AND CORRECTIVE MAINTENANCE
(48,30(176$)(7<7,36&RQWLQXHG
To ensure that static-sensitive devices such as printhead and printed circuit boards
are not damaged during disassembly and reassembly, observe proper electrostatic
safety precautions when handling these components.
Zebra recommends using solvent containing 70% isopropyl alcohol and 30%
distilled water for cleaning of:
• Printheads
• Platen Rollers
• Peel-Off Roller
• Media Path
• Peel/Tear Bar
• Spindles
Ribbons used in the printers must be as wide as or wider than the media. If the
ribbon is narrower than the media, areas of the printhead will be unprotected and
subject to premature wear.
To ensure the printer has proper ventilation and cooling, do not place any padding or
cushioning material under the unit because this restricts airflow.
Install Zebra printers on a solid, level surface of sufficient size and strength to
accommodate the physical dimensions and weight of the unit. The area enclosure in
which the printer will operate must meet the environmental conditions specified in
the Maintenance Manual or User’s Guide. Electrical power must be available and in
close proximity to the printer.