Specifications

Page 3-16 105SL Maintenance Manual 32056L Rev. 2 12/4/01
SECTION 3 TROUBLESHOOTING
5HWXUQLQJ(TXLSPHQW
Should it become necessary to ship your 105SL printer, carefully pack it in a suitable container
to avoid damage during transit. A note describing the failure must be enclosed with the unit.
Whenever possible, the original shipping container should be used. If the original shipping
container is not available, a replacement can be ordered by contacting the Technical Support
department. If other containers are used, a procedure similar to the original factory packaging
should be followed.
Remove all media and ribbon from the printer. Enclose the unit in a protective, dust-proof bag
and ensure that the unit floats in an outer carton of shock absorbing material.
A Return Materials Authorization (RMA) number is required for all equipment being returned.
Contact Zebra Technologies Corporation’s Technical Support department to obtain an RMA
number. Equipment returned for service without prior authorization may be refused.
CAUTION:
BEFORE PACKING THE PRINTER, REMOVE ANY RIBBON AND PAPER
ROLLS FROM THE MEDIA COMPARTMENT. DO NOT PACKAGE THE
PRINTER IN A RIGID CONTAINER WITHOUT UTILIZING SHOCK MOUNTS
OR SHOCK-ABSORBING PACKING MATERIAL. A RIGID CONTAINER WILL
ALLOW SHOCK ON THE OUTSIDE TO BE TRANSMITTED TO THE UNIT
AND MAY CAUSE DAMAGE.