Specifications

32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 3-11
TROUBLESHOOTING SECTION 3
%DVLF7URXEOHVKRRWLQJ
Refer to Table 3-2 and compare the printer output to the sample label to improve the quality of
your labels.
Figure 3-12. Format 9 and 13 Test Sample Label
Figure 3-13. Format 10 and 14 Test Sample Label
Table 3-2. Troubleshooting
SYMPTOM DIAGNOSIS ACTION
Printer is dead. No LEDs light
and no display.
AC power source not live. Plug power cord into a live AC source.
Power cord not fully inserted
into power source or power
entry module.
Make sure that power cord is fully inserted
into the AC receptacle and the power entry
module.
AC fuse blown. Replace AC fuse.
Power supply faulty. Replace power supply.
Main logic board failure. Replace main logic board.