Specifications

Page 3-4 105SL Maintenance Manual 32056L Rev. 2 12/4/01
SECTION 3 TROUBLESHOOTING
&$1&(/.H\6HOI7HVW
This self test prints a single
label which contains a listing of
the current configuration
parameters stored in
configuration (EEPROM)
memory. See Figure 3-1.
To perform this self test, press
the CANCEL key while turning
the power switch ON.
The configuration may be
changed either temporarily for
specific label formats or ribbon
and label stock, or
permanently by saving the new
parameters in EEPROM
memory. Saving new
parameters occurs whenever a
printer configuration procedure
is performed.
Refer to the User’s Guide for
further details on the printer
configuration procedure.
Figure 3-1. CANCEL Key Test Sample Label