Specifications

32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 2-39
OPERATION OVERVIEW SECTION 2
6HWWLQJWKH1HWZRUN,'
Use Network ID to assign a unique number to a printer used in an RS-422/RS-485 network.
This gives the host the means to address a specific printer. This does not affect TCP/IP or
IPX networks.
Press the left oval key to move to the next digit position, and press the right oval key to
increase the value of the selected digit.
Default: 000
Range: 000 – 999
Press the NEXT key to display COMMUNICATIONS.
6HWWLQJWKH&RPPXQLFDWLRQV0RGH
The Communication Diagnostics Mode is a tool to check the interconnection between the
printer and the host. When DIAGNOSTICS is selected, all data sent from the host to the
printer is printed as an ASCII hex printout. The printer prints all ASCII characters received,
including ASCII control codes (for example, CR [Carriage Return]). Figure 2-28 shows a
sample printout.
Press the right or left oval key to display other selections.
Default: Normal Mode
Selections: Normal Mode, Diagnostics
1(7:25.,'
→ 
&20081,&$7,216
←1250$/02'(→
Figure 2-28. Diagnostics Sample Label