Specifications

32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 2-17
OPERATION OVERVIEW SECTION 2
&XWWHU0RGH
NOTE: Factory installed only cutter option required.
Refer to Figure 2-17.
1. Open the printhead.
2. Slide the media guide and media supply guide as far from the printer frame as possible.
3. Load media as shown.
4. Slide in the media guide and media supply guide so they just touch, but don’t restrict,
the edge of the roll.
5. Close the printhead.
6. The printer automatically cuts once during the Power On Self Test.
Figure 2-17. Cutter Mode Loading
Open
Printhead lever
C
utter
Media
supply
guide
Med
ia
Media
guide