Specifications

32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 6-25
OPTION KITS SECTION 6
12. Reconnect the power cord and the data cables to the printer.
13. Reconnect the power cord to the power source. Place the power switch in the On (I)
position.
14. Ensure the printer configuration is set as shown in Table 6-4.
15. Send a sample label format from the host computer to the printer to test for proper
operation.
Right Left Left Left 8 - France
Right Left Left Right 9 - Italy
Right Left Right Left A - Japan
Right Left Right Right B -Japan (English)
Right Right Left Left C - Portugal
Right Right Left Right D - Spain
Right Right Right Left E - Spanish Speaking
Right Right Right Right F - United Kingdom
NOTE: The language character sets 1 - US/Canada and B - Japan (English) are the same. The character
sets for D - Spain and E - Spanish Speaking are the same.
Intervention Required Message
Switch #7 Description
Left Inhibits the sending of the “Intervention Required” (IR) status message.
Right When a printer error condition is monitored by the coax interface for a period of at least 10
minutes, an “Intervention Required” (IR) status message is sent to the host.
Early Print Complete
Switch #8 Description
Left An “Operation Complete” status message is sent to the host after a label format is completely
printed. The host can then send the next label format to be printed.
Right Enables the “Early Print Complete” function. The host can send additional print jobs to the printer
without waiting for the actual completion of the current print job. The printing status sent to the
host reflects the label formats received, not the ones completed.
Buffer Size Selection
Switch #9 Switch #10 Description
Left Left 3564 Byte buffer
Left Left 3440 Byte buffer
Left Right 1920 Byte buffer
Left Right 960 Byte buffer
Switch 11 Not Active
Switch 12 Not Active
Table 6-4. Setting Printer Configuration for Coax
Parameter Setting
Parallel Port Twinax/Coax
Table 6-3. Coax Dip Switch Setting (Continued)