Specifications

Page 6-24 105SL Maintenance Manual 32056L Rev. 2 12/4/01
SECTION 6 OPTION KITS
NOTE: After setting the DIP switches, turn the printer power off (O) and back
on (I). With the exception of DIP switch number 2, the printer monitors
the positions of the DIP switches only during the Power-On Self Test
(POST). The EBCDIC buffer print function is enabled whenever DIP
switch number 2 is placed in the “Right” position.
11. Refer to Table 6-3. Set the dip switches in the correct position for this application.
Figure 6-20. Coax Adapter Cable and Interface Hook up
Table 6-3. Coax Dip Switch Setting
Test Mode
Switch #1 Description
Left Normal label printing section.
Right When printer power is applied, the coax interface performs a self test. A self test label printout
lists the coax interface software revision, selected language, results of RAM/ROM tests and a
sample code 39 bar code.
EBCDIC Buffer Print
Switch #2 Description
Left Normal operation (received EBCDIC data is translated to ASCII Data).
Right Received EBCDIC data prints as large characters which are readable hex equivalents. Use only
for troubleshooting with the printer in the “Diagnostics” mode.
Default Language Selections
Switch #3 Switch 4 Switch 5 Switch 6 Language Selected
Left Left Left Left 0 -Multinational
Left Left Left Right 1 - USA/Canada (Factory setting)
Left Left Right Left 2 - Austria/Germany
Left Left Right Right 3 - Belgium
Left Right Left Left 4 - Brazil
Left Right Left Right 5 - Canada (French)
Left Right Right Left 6 - Denmark/Norway
Left Right Right Right 7 - Finland/Sweden