Specifications
32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 6-1
OPTION KITS SECTION 6
6(&7,21
237,21.,76
%$&.,1*5(:,1'237,21.,7/,1(55(:,1'
This kit (part # 33180) includes the parts necessary to install the backing rewind option into
the 105SL. The kit includes all the parts listed in Table 6-1 and shown in Figure 6-1.
* Only available in quantities of 25 as Part Number HW30393-006
** Only available in quantities of 25 as Part Number HW40193
*** Only available in quantities of 50 as Part Number HW30392-004
† Only available in quantities of 25 as Part Number HW30118
†† Only available in quantities of 25 as Part Number HW30114
††† Only available in quantities of 25 as Part Number HW30115
‡
Only available in quantities of 100 as Part Number HW07435
Table 6-1. Backing Rewind Option Kit Inventory
3
Item # Qty Part Number Description
13 Screw, 8-32 × 0.37, Socket Head Cap
26 Washer, Flat 0.406 x 0.172 x 0.048
32 Bearing, Flanged (Part of 32211M)
4132011M Kit, Maintenance, Platen Roller
51 Kit, Backing Rewind Spindle
6140490-2 Hook, Rewind
7140019 Bracket, Platen Support
85 Screw, 6-32, Socket Head Cap
9102252 C-Ring
10 1 Assembly, Bearing Housing (Part of 45055)
11 1 31336M Kit, Maintenance RTU/MTU Pulley
12 1
† E-Ring 0.500 x 0.042
13 1 45189-2 Belt, Rewind Drive
14 1
†† Washer, Flat 0.76 x 0.51 x 0.03
15 1
††† Washer, Wave 0.740 x 0.520 x 0.080
16
1 30257 Pulley, Rewind (12 Dot/mm, 300 dpi)
1 48018M Pulley Rewind (8 Dot/mm 203 dpi))
17 1 46609-4M
Assembly, Lower Take Label Sensor (Black/Red Wires)
Assembly Upper Take Label Sensor (Green/Yellow Wires)
18 6 ‡ Screw, 6-32 x 0.37
19 1 30265 Pulley, Idler
20 1 22004-1 Spacer
21 1 30207 Shaft, Idler
22 1 46909 Spacer 0.750 x 0.520 x 0.300 (Part of 31336M)
23 1 11301 Wrench, Long Allen, 7/64
″
N/S 1 Grease (Lubriplate GR-132)
(N/A) – Not Available as a Separate Service Item N/S – Not Shown
Bold = Part available for purchase
Light italic = Part not available for purchase, listed and shown for reference only