Specifications

Page 5-32 105SL Maintenance Manual 32056L Rev. 2 11/29/01
SECTION 5 MAINTENANCE AND ASSEMBLY DRAWINGS
Figure 5-17. Cutter Option (View 2)
Relative position of the rotary cutter
blade when the drive link assembly is
stopped by the optical sensor, when
the power is on in the cutter mode
0.100"
(2.5 mm)
10421 screws (4) control
position of cutter module
& squareness to media
Rear Cutter
Blade
Rotary Cutter Blade
Media Guide
Upper Cutter Bracket
Mounting Screw
Tear-off
Bar
Clearance of 0.030"
(0.762 mm) minimum
rear cutter blade
and tear-off bar
between
Insure the Top of the Tear
off Bar is Positioned Above
or Level With the Top of
the Rear Cutter Blade
Set screws to engage flats
on motor shaft when lower
arm is in vertical position
Motor
Shaft
Cable holder
(30313) to be
securely over
cables
Motor
Rotation
Direction
01660
Grease
All Around
Black flag to be
centered in optical
assy
Front View
Side View