Datasheet

76 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Installation and Setup
Changing the Printer Driver Options (Properties)
8. ID/Code: ID/Code is a security feature that restricts the use of the printer to PC's which
have had a password entered. Once entered, the PC will send this password to the printer.
If the printer does not receive the password, it will not print.
•To enable the password, click “Set ID/Code”. Leave the Old Password field blank,
and enter the new password into the New Password and Confirmation fields. Click
“OK”. The password is now set.
•To change the password, click “Set ID/Code”. Enter the old password into the Old
Password field, and enter the new password into the New Password and Confirmation
fields. Click “OK”. The password is now changed.
•To disable the password, click “Set ID/Code”. Enter the old password into the Old
Password field, and leave the New Password and Confirmation fields blank. Click
“OK”. The password is now disabled.
9. Disable Printer’s Print Button: Enable or disable the front panel Print button to prevent
card reprinting.
10. Disable Printer’s Other Buttons: Enable or disable the front panel Ribbon and
Laminate buttons.
11. Status Polling Frequency:
• Normal: This is the default for directly connected printers.
• Reduced: This is the default for a printer connected via Ethernet. This eliminates
problems caused by timeout, because the driver polls the printer less often.
• None: Selecting this option stops the driver from checking the printer for errors. The
driver just sends print jobs and assume everything is well with the printer. If the
printer stops printing, the reason must be determined via the front panel
condition lights.
12. Number of Times to Retry: This number indicates the number of times the driver should
attempt to communicate with the printer if it gets a failure. The default is 3.
Note • For EIN to work correctly, the None option needs to be selected.