Datasheet

Installation and Setup
Changing the Printer Driver Options (Properties)
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 75
4. Update Backup Config: Causes the printer to update its backup configuration with the
printer's current settings.
5. Upgrade Firmware:
Sends a new version of firmware to the printer.
6. Send Features File: Send a Features File to the printer. A Features File is sent for the
purposes of enabling Uv printing, resetting a dongle, or resetting the printer's password.
7. Password Protection: Enable or disable password protection to prevent someone from
changing the Printer Properties.
When the Use Password checkbox is checked, the following pop-up appears:
• Enter the new password into the New Password and Confirmation fields. Click “OK”.
The password is now set.
•To change the password, click the “Use Password” checkbox. Enter the old password
into the Old Password field, and enter the new password into the New Password and
Confirmation fields. Click “OK”. The password is now changed.
•To disable the password click, the “Use Password” checkbox. Enter the old password
into the Old Password field; and leave the New Password and Confirmation fields
blank. Click “OK”. The password is now disabled.
Caution • This should only be done when you have downloaded an upgrade firmware file
from Zebra.