Datasheet

Installation and Setup
Changing the Printer Driver Options (Properties)
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 61
2.7.7.1 Printer Adjustment
To access the Printer Adjustment screen, select Start > Printers and Faxes. Right click on the
Zebra P630i or Zebra P640i printer listing. Select Properties > Device Settings >
Printer Adjustment
The following procedures can be performed via the Printer Adjustment screen:
• Print Station Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
• Laminate Station Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
• Flip Station Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
• Advanced Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
• Card Hopper (Pick Position Adjust (Pixels): Adjusts the position of the truck when
picking a card from the hopper.
• Cleaning Station (Clean Frequency): Runs clean cycle will be run after the specified
number of cards have been printed. The clean frequency range is from 1 to 20, the
default = 10.
Caution • Modifying these values could cause undesirable results.