Datasheet

Installation and Setup
Installing the Printer Driver
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 47
Step 8. Any Zebra printers will be located. Select (highlight) the desired printer (for this
procedure it is a P640i, but the steps would be the same for a P630i) and click the
OK button.
Step 9. The Configure Ethernet Port screen will reappear, but now the information for the
P640i printer selected in Step 8 will be displayed. Then click OK.
Note • If the Printer is not found, check to make sure the Printer is powered on and the
Ethernet connector is engaged.
Also, the Ethernet Network must be configured correctly, with the Printer and the host
computer on the same subnet mask. If you are not sure how to verify this or change the
configuration, consult someone knowledgeable on Ethernet Networks.